@RBronx Thank you for your post. Please confirm whether Load Balancing is enabled; if it isn’t, Policy Routing will not take effect. Additionally, you can change the Service Type to “all,” which...

@matigarowel For the Omada Controller, usage-based timing can be achieved through vouchers. If an external portal is used, this functionality must be implemented on the external portal server itself.

@NaHD Your current firmware is quite old. Please visit our official website to download the latest firmware and upgrade the switch, then test again.Firmware Download In addition, verify whether...

@Kenallo The features available in the Controller may not always be synchronized with those supported by the firmware. This feature was added in the current firmware release, but it is not yet...

@mbze430 The “Match” here is for you to define the DSCP value. Under normal circumstances, following the provided configuration should rewrite the DSCP value. If the rewrite fails, you need to review...

@CableWhisperer Yes, currently the Gateway ACL LAN-to-LAN does not support IP groups or IP-port groups. Additionally, the Switch ACL does not support stateful ACLs, so your requirement cannot be met.