@Nathan-TP Actually I tried these steps before. I have used different cat6 cable to connect the CPE 610 with poe. Also I suspected if the router was broken, I tested it with another router as well,...

@Nathan-TP iPerf result from the router which connected to AP Speed result from the client side: fast AP: 254 Client: 253 After some time I lost connection between AP and client. There is no problem...

I have two CPE610 antennas. On the AP side, Port0 shows 100Mbps - FD, but on the client side, Port0 shows 10Mbps - FD. I checked with different PoE adapters and LAN cables, but the result is the...