tplink_cpe510_LV1Offline
Following: 0Followers: 0
Forums/ Pharos Wireless Bridges
2018-07-04 22:19:28
Enabling DynDNS on CPE510?
Model : CPE510 Hardware Version : Firmware Version : CPE610(UN)_v1.0_20180327 ISP : Several! Hello, I have two CPE510's with one configured as an AP and the other as a CLIENT, I attempted to enable...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-06-13 01:39:34
Re:CPE510 Point to multipoint - NO INTERNET ACCESS
Great, glad you got things working! If you can live with the constraints I previously mentioned, I think using CLIENT mode is easier and very straightforward to get operational It also makes...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-06-12 02:13:59
Re:CPE510 Point to multipoint - NO INTERNET ACCESS
No to disagree with @R1D2, however, in setups I have deployed, I have always used fixed (or statically assigned DHCP issued addresses) for the equivalent of your CLIENT CPE510 devices. All of the...
1HELPFULS
Forums/ Pharos Wireless Bridges
2018-06-11 02:14:05
Re:CPE510 Point to multipoint - NO INTERNET ACCESS
One issue, your client CPE510's should each have a unique IP address. For example, the top client CPE510 can stay at 192.168.0.254, however, the bottom CPE510 should have a different address. -...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-06-11 02:08:03
Re:CPE510 (client) -to- CPE510 (AP) Connection (LInk) Reliability Issue!
I have tried every combination of CPE510, WBS510 and Beta firmware and I still experience the problem of the AP and CLIENT CPE510 devices rebooting and loosing the point-to-point connection between...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-05-29 23:08:54
Re:CPE510 (client) -to- CPE510 (AP) Connection (LInk) Reliability Issue!
Sorry, please ignore this duplicate thread!!!! Please use and reply to the following thread:...
0HELPFULS
12