TP-Link DecoOnline
Following: 0Followers: 13
Forums/ Deco
Wednesday
Re:Re:Re:Re:How to set up Ethernet Backhaul with your Deco devices
@SamyKn As per your description, all the units are working in AP mode. Then every Deco unit should obtain an IP address from the Router via DHCP. And the Router should display all the units....
0KUDOS
Forums/ Deco
Wednesday
Re:Re:Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
@JoeBlack12 It could be a DNS issue. Please make sure your phone is connected to Deco's Wi-Fi network, then follow the FAQ link below to change Deco's DNS server to 8.8.8.8 for a try....
0KUDOS
Forums/ Deco
a week ago
Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
@Vindel @Alan062 The new features for Deco M4 and M9 Plus will release soon after Deco M5's public release. @Dayfat Thanks for pointing the spelling error. Will fix it in next release. @EnsignRam If...
0KUDOS
Forums/ Deco
a week ago
Re:Re:Re:Latest firmware (version 1.3.1) with new features for Deco M5 is available now
@thefunkygibbon As described in the thread, the new firmware is partially released currenctly. But don't worry, it will soon release to public within a week. As for ZigBee, we recommend Deco M9 Plus...
0KUDOS
Forums/ Deco
a week ago
Re:Re:How to set up Ethernet Backhaul with your Deco devices
@SamyKn What's the LED status on the other Deco unit which is not listed in the arp table? Try to connect a PC to the Ethernet port of the remote unit, then try to ping your router. After that, check...
0KUDOS
Forums/ Deco
3 weeks ago
Re:Re:Re:Re:Re:How to set up Ethernet Backhaul with your Deco devices
@Adonis Maybe you need to divide the network into two VLANs through the switch. In this case, you can set up two Deco networks connected to the two ISP routers separately through the switch with the...
0KUDOS
123...19