@urbciech, you need to select WPA2-PSK (pre-shared key), not WPA2 Enterprise:

@LaCorne, yes, it's part of the same network and it will support basic roaming according to the 802.11 standard. However, seamless roamin aka fast roaming will not work betwee your router's WiFi and...

LaCorne wrote Should the light flash as soon as I plug it in the LAN port of the router? No. You cannot connect the EAP225-Wall to a LAN port of a router directly. The EAP225-Wall needs a PoE (Power...

pedrovsky wrote Considering I wanted to do this exact same setup, but without having as many cables from the router to the switch as VLANs, what would be the best solution? A VLAN aware router (with...

@urbciech, no, it should be more or less symmetric, too. This sounds to me that the antennas are not aligned propery or that the CPE clients cause interference on the main CPE in AP mode. Things you...

@AndrewW-link, Omada Controller will assign the hidden ESSID a private BSSID (MAC address). This is done by setting the second least significant bit of the first octet to »1«. Private MAC addresses...