Hi @Danicor, I would recommend to use an own SSID with own WiFi key for the directional link between the CPEs. Once set up, you can even disable broadcasting of the SSID. As for the EAP at location B...

Heilmar wrote I have saved the config, but after the reboot I had the default ip again, even after I restored the saves config So you think the switch has a defect? Could be, but I doubt this if the...

@PeterK2, it's pretty easy to set up an asymmetric VLAN. The TL-SG108E also has an own menu entry for a pre-defined asymmetric VLAN, it's Multi-Tenant Unit VLAN (MTU VLAN). It works as follows: Let's...

Hi @Pascal, sorry, I didn't expect a release of a new firmware for EAP225-OD so fast, so I missed to ask you in first place what firmware versions you are running. I probably can make tests with the...

@PeterK2, you need untagged ports in more than one VLANs if you want to use an asymmetric VLAN setup. In general, devices always should only offer a mechanism, but not enforce a policy. An asymmetric...

traeu wrote Can you tell me which new firmware vor V4 you meant? The latest firmware for V4 i can find is 20181120. This is the latest firmware for V4. Its not possible to delete vlan1 on that...