Forums/
Routers
2019-07-30 09:40:17
kotusha1 wrote I have two tunnels sitte-to-site, has gateway TL-ER6020 in each remote location TL-R600VPN, one tunnel works fine, but the other only sees or ping the TL-R600VPN rotuer ip, they are...
0HELPFULS
Forums/
Switches
2019-07-04 07:08:09
Hi Rev T1600G-28TS V3 will release the new firmware soon. It should hasn't this issue. You can pay attention to the official website. Wait for the new firmware.
1HELPFULS
Forums/
Switches
2019-07-03 08:29:35
Hi Rev Please check the version of T2600-18TS not TL-SG3216. Then try to upgrade the latest firmware (v2). If the latest firmware still has the issue, we suggest to contact TP-Link Support.
0HELPFULS
Forums/
Routers
2019-07-03 08:23:27
Hi Kinesra If you mean IPsec LAN to LAN VPN, then all TP-LINK VPN routers support it. And we recommand to choose the latest hardware version. If you mean IPsec Client to LAN VPN, generally it's used...
0HELPFULS
Forums/
Switches
2019-07-02 07:04:23
Rev wrote Same problem here too someone have any solution ? If you are using T2600G-18TS V1, you can try to upgrade the firmware to V2. V1 can use the firmware of V2. But you may lost the...
0HELPFULS
Forums/
Routers
2019-07-02 06:58:54
MorrisAGE wrote How many MAC addresses can be entered into the MAC address filtering list for the above router? Hi MorrisAGE If you are using R600VPN Ver 4.0, it supports up to add 80 entries of MAC...
1HELPFULS