@Tedd404 Ok, I got pings to go through to Site A while using a secondary IP at Site A. It was a combination of my firewall was still enabled on this PC I was using, I had disabled it on another. And...

@Tedd404 The new map just has 1.50 changed to 3.1. The 3.1 is the LAN of the ER605 at Site A. So the ER605 WAN is 0.10 and the LAN is 3.1. The computer on my main Site A LAN is 192.168.1.218...

I've been battling a VPN connection for a week now. Tried to get some help from this reddit thread. I have a WireGuard tunnel that can work both ways with DHCP or Static IPs on the same subnet. But...

@Clive_A I decided to use two ER605s routers. I've read through the provided Guide, but I'm confused if both Peers, one from each side, need to connect to the other peer? i.e. Entering in an Endpoint...

I have an Archer AX55 v1.0-AX3000 (latest firmware) at the main office, behind another router using NAT. I've enabled the VPN server using WireGuard. I've forwarded the correct port to the Archer....

Hmm. I wonder if it's somehow related to an issue I had with my RE450 bridge. I have 2 gigabit LAN networks bridged using an RE450 in the livingroom (WiFi extension disbled, only bridge mode) and a...