Is there anywhere within the system that some stats, data throughput etc can be seen for VPN tunnels - site to site. You can see the link status and details but there is no real time information that...

@Somnus Thanks, I actually thought that was the case as the port is effectively a .1 q trunk port carrying multiple L2 vlans. Just wondered if I had missed something. I do have an Omada gateway but...

Problem solved, remembering that I have a spectrum analyser adapter did some scanning internally and found I have something hogging channel 7 and spreadiing across the 3 adjacent channels either...

I actually think this may be a local issue, just used the system to do a scan and the interference on channel 6 is almost 100%, its actually channel 7 and is spreading quite wide so some RF sniffing...

@Somnus Everything is running the latest firmware and I get stats for all of the interfaces except the ones that are VMs, and they are internet connected interfaces. Most odd.

I have a strange issue I have noticed. I have 2 EAP225s running and an EAP115 connected to a hardware OC200. For 2.4 all of the access points only work on channels 1 and 11. If I set the channels...