@Clive_A Hello Clive. I disconnected all the camera cables from the NVR, replaced the cabled from NVR to switch, and tested a new camera with new cable on the last never used port. The issue persists.

yes, I planned on pulling all the existing cables from the nvr and adopting a new camera with new cable for testing. 7 outdoors and 1 indoor.

@Clive_A "In the original post, you mentioned that monitor/TV shows the error when watching the live view. That is to say, these devices are using HDMI/VGA to connect to the NVR, and this error...

@Clive_A yes, without touching the physical connection or config. It will cycle error with "no network video" every 5-8 seconds. The VIGI app has no issues with continuous live view. There are 9...

Hello, I recently received a report 2 days ago from one of my clients saying that live view on the monitor or TV would not show any of the 9 Vigi POE cameras for 5 seconds and then reappear again....

Anyone run into any show stoppers with FW 1.3.0? I'm so wanting to hit the update button.