ragnakoreLV2Online
Following: 0Followers: 0
Forums/ Deco
2023-07-17 22:27:49
Deco Schedule WIFI
Scheduling was requested for many times and as early as 4 years ago. Yet to date, TP-LINK is still not adding it. Frustrated, I went and installed a simple Sonoff/Tasmota power plug that I can...
0HELPFULS
Forums/ Deco
2021-11-10 21:52:08
Why multiple DECO use a single 2.4GHz channel?
If I have multiple DECO M5 devices all connected to the main hub through ethernet, why do they have to transmit in the same 2.4GHz channel, same 5.0GHz channel? The backhaul is ethernet already. Why...
2HELPFULS
Forums/ Deco
2021-10-29 20:31:30
Q re M5: Why not transmit in multiple channels?
GIVEN: Multiple DECO M5 devices in the mesh, all wired to a central internet hub/router Why DECO transmits in a single channel? example: All DECO devices transmit in a single 2.4Ghz, and in a single...
0HELPFULS
Forums/ Deco
2021-09-11 08:17:38
Re:Separate 2.4 ghz and 5 ghz on Deco M4
I doubt TP-Link will ever release a firmware with separate SSID. Like they said, doing so will destroy their MESH. I had M5, but all machines connected through M5 periodically stutters, ZOOM meetings...
0HELPFULS
Forums/ Deco
2021-06-30 08:17:05
Re:M5: Should I enable IGMP?
You access this via HTTP into the Deco's IP Address, and from there, you get to see alot more than what the APP shows:
0HELPFULS
Forums/ Deco
2021-06-25 04:23:14
Re:Selecting channel/possible legal implications
We badly need this ability: To set Channel, and to set Bandwidth as well. Just like my case, my neighbor/brother was transmitting using Channel 9 at full 40MHz. It is not a problem as DECO uses...
1HELPFULS