Forums/
Deco
2024-09-13 04:25:30
@Sunshine Thanks for the reply. When you mentioned device isolation, I've just realised I've made a schoolboy error . I have 2 WiFi networks, one for 2.4Ghz network and another one with a different...
0HELPFULS
Forums/
Deco
2024-09-12 11:02:40
I have various devices such as a weather station, boiler and security cameras that have to be connected via the 2.4Ghz network. I can connect to these when the device I am using is connected to the...
0HELPFULS
Forums/
Deco
2024-06-19 09:55:05
@Sunshine just to update this thread. The IPTV settings in my setup are disabled. I will update the thread as suggested when/if a solution is found thanks
0HELPFULS
Forums/
Deco
2024-06-18 12:04:14
@Sunshine No the device cannot get an IP address from the deco. The device no longer appears in the client list
0HELPFULS
Forums/
Deco
2024-06-14 06:16:53
@Sunshine I checked and there are no parental controls set. Are you talking about the blocked device forgetting the network? If so, the device does not have capability to remember networks. It's a...
0HELPFULS
Forums/
Deco
2024-06-13 12:34:45
I had blocked a device that was connected to one of my decos with a wired connection. I then removed the device from the blocked list but can't get the device to reconnect. I have tried to disable...
0HELPFULS