rcaridadeLV1Online
Following: 0Followers: 0
Forums/ Deco
2020-08-04 09:48:56
Deco P9 - Manual channel selection on both 2.4Ghz and 5Ghz (please read to understand)
Hi, Is it possible to put manual channel selection for both 2.4Ghz and 5Ghz? I explain my problem, I have a house with 3 floors and at each floor level my neighbors on both sides of the house have...
0HELPFULS
Forums/ Wi-Fi Routers
2020-07-03 07:45:45
Re:Why TP-Link says RE300 connect up to 32 devices and can only connect 20?
I know what is the problem, in RE300 firmware there is a limit of 16 connections for 2.4Ghz and 16 connections for 5 Ghz. Thats why they say 32 devices. RE300 uses the chip RT2860 and limit in the...
0HELPFULS
Forums/ Wi-Fi Routers
2020-07-02 15:50:25
Why TP-Link says RE300 connect up to 32 devices and can only connect 20?
I don't understand why I bought a TP-Link RE300 that is able to connect up to 32 devices and in my one mesh system, it only accepts 20 devices, can some one explain to me? Is TP-Link telling wrong...
0HELPFULS
Forums/ Wi-Fi Routers
2020-06-17 11:37:02
Re:Disapointed with TP-Link as a company and Archer C6 v2 EU (No OneMesh support)
@Rylander yes and it works perfectly. But I changed the Archer C6 by a Archer C7 to get a bit more processor speed because I have 60+ home automation devices connected to the system and Archer C7...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-05 08:57:41
Re:Disapointed with TP-Link as a company and Archer C6 v2 EU (No OneMesh support)
Finally TP-Link publish the firmware upgrade.
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-05 08:55:56
Problems with TP-Link Archer C7 / OneMesh with IOT devices
I'm using Archer C7 with two RE200 and one RE305 in OneMesh configuration to share WiFi in my home, but I'm having problem with the number of devices because I use +- 60 On/Off devices connected...
0HELPFULS
12