Forums/
Routers
2 weeks ago
@Clive_A When i checked on the tag on the router, version is 2.8 and when i checked the firmware upgrade page in router's portal, it shows that version is 2. Existing installed firmware is 2.1.2...
0HELPFULS
Forums/
Routers
3 weeks ago
Hello everyone, Yesterday I was implementing Client-to-LAN VPN scenario. My network topology is shown in image below: ER605 VPN router is behind the ISP's fiber router. I tried following thing on...
0HELPFULS
Forums/
Pharos Wireless Bridges
2024-10-08 10:04:46
@Vincent-TP Yes. I did it. Its fiber link between 2 switches and at both the end we have 1000mbps media converter. We tried to change CAT6 patch cord (which is plugged between media converter &...
0HELPFULS
Forums/
Pharos Wireless Bridges
2024-10-05 10:08:56
Hello Everyone, We connected and configured a CPE510 (Hardware ver=3.20) outdoor device for providing wireless access in garden area from a building. So, we configured it in "access Point" mode. So...
0HELPFULS
Forums/
SOHO Switches
2024-08-29 17:39:39
Hello everyone, We have total 5 TL-SG1428PE switch 3.0 switches. I configured these switches, but could not find any option to view MAC address table...!! (Any smart/semi-managed switch of any vendor...
0HELPFULS
Forums/
Wi-Fi Routers
2024-04-08 04:32:03
@terziyski I checked that in different way. I joined one wireless device and assigned manual IP in the range of 192.168.1.X and other devices were joined ang recevied IP addresses from DHCP pool. I...
0HELPFULS