@MR.S I rebooted it yesterday and I was at 78% now I am 87%. Thanks for the tip,

@Vincent-TP I tried accessing ssh via the controller but the free command doesn't seem available. I did use the "Download Device Info" before I rebooted it. I think this is the free output:...

@Vincent-TP Only 2 clients. Not really a ton of traffic. My picture isn't saving on the post, but basically it steadily rose from the mid 70s to over over 90%. When I rebooted, it dropped back to 74%...

@Vincent-TP I have a EAP610-outdoor that I updated around June 18th, and since then the memory usage has risen a lot. It seemed like I was in the 70% usage normally before and I just noticed its...

I have heard that the C220 should be out before September, so maybe another 1-1.5 months. If you can't wait for that your options are the C300 or trying to spin up a software controller (which is...

So support had me update to 1.1.0 and change the 2.4G Beacon interval to 50 from 100. Its been 2 days and no issues so far but I also don't really understand the downside of doing this.