hi all, as I have learned in my previous post "ACL - allow access to single IP in another VLAN" there is currently no possibility to set granular per IP rules. I have tried another approach - created

Hello and good Morning I tried a lot and read many posts on many sites, but unfortunately I fail to get my switches detected by OC200. The setup is like the following: Router: Netgate 6100 running pfs

Hi. I'm having a problem with my ACL. After enabling the "DenyAll" rule, I can't communicate with devices from external device. The tunnel works fine without this rule. With this rule, it's visible on

Is there any work around when hitting the limit of 16 allowed IP-Port Groups? It seems a serious limitation for any product aimed at the business market. If there is a not a workaround are there any p

Hi all, My ER707-M2 lives in a poorly ventilated rack and currently shows an operating temperature of 51C. Is this OK (as I have read online that it should not exceed 40C).

I am planning a transition from a 10 years old OpenMesh system to an Omada System. My current OpenMesh setup is 100% web based and so I am considering to move to a an Omada Cloud based system. The net