This is a feature request for device (EAP, Switch, etc) boot logs (reset, cold boot, reboot) that would assist in Omada WiFi distribution troubleshooting. There are no boot up logs.. cold boot... cold

GW is ER7206 v1.0 1.4.1 Devices appear as WIRED, but cannot be. Seem to be IoT devices. They go to sleep and reappear. Some coming back with different last three octets. MAC ID lookup comes back as Es

Clients experiencing loss of connectivity events (buffer circle) randomly. 2 or 3 times per day. Loss of connectivity is the symptom. Is the Omada device going on-line messages in logs equivalent to a

Problem Statement: Two seemingly equal WAN feeds to GW via two StarLink terminals are not sharing load equally. WAN 2 takes majority of load, while SFP WAN (1) a fraction (<20% when busy and <10% when

say, looking at my logs, i have a few devices connected to my switch.. every few minutes they report disconnected, then connected a few minutes later.. the devices definatley are online when reported

I've been experiencing issues with smart devices connecting to VERY FAR away APs and getting signal levels in the -85+ range. I have set an RSSI threshold on the AP's to -75, and confirmed that there