xPON Forums - Home Network Community

After upgrade to latest firmware we have this issues? HW revision change since software 1.13 - after upgrade software from 1.10 to 1.13 firmware change Hardware revision from "V2" to "V1.0" we have lo

Firmware Update

By TomasChott · Latest post 59 minutes ago by Kevin_Z

1Helpful

166Views

2Replies

I need old version firmware

I updated my ont but after updating some of the option are not coming which are I required please provide firmware 1.10

Firmware Update

By punda · Latest post an hour ago by Kevin_Z

3Helpful

137Views

8Replies

XC220-G3v LAN Port Not Initializing Properly After Firmware Upgrade from 1.8 to 1.10

Before the upgrade, everything was working perfectly. After upgrading to firmware v1.10, the ONT no longer initializes the LAN port correctly after every reboot. Network Setup Airtel Fibre connection

By Oak_01 · Latest post 23 hours ago by Kevin_Z

0Helpful

183Views

3Replies

Firmware Too Weak

I have recently bought a TPlink xx530v to replace the JioRouter which was extremely restrictive. Setup was an easy process and everything works fine. However, everything works fine except for QoS. One

Web GUI ManagementFirmware UpdateQoSBandwidth Control/QoS

By Regulus252 · Latest post Yesterday by Kevin_Z

2Helpful

115Views

1Replies

xx530v EPON registering loop error from random power cycle

@HoiWong @Kevin_Z Recently purchased xx530v and i configured it with bsnl ftth it's working normally in epon mode for 1 or 2 days but after random power cycle after power resume this router goes into

BSNLNetwork Connectivity

By Ram_Eswar · Latest post Yesterday by Kevin_Z

11Helpful

1108Views

14Replies

Xx530v XPON loop issue

Dear Team, I am writing to bring two potential software-related issues to your attention that I believe warrant investigation and resolution. 1. **MAC Cloning and PPPoE Download Speed Limitation:** Wh

Firmware UpdateBSNLNetwork ConnectivityXX530V

By IndrajitIG · Latest post Yesterday by xylitol

41Helpful

2435Views

40Replies

XX530v V2 SLID setting.

I recently bought an XX530v V2 from an online store and the first thing I did was upgrading it to the latest firmware (downloaded from TP-Link product support page). I'm currently using it through the

Installation

By Marcio_Miranda · Latest post Wednesday by TomasChott

1Helpful

88Views

1Replies

Super Admin : Access related

After a recent firmware update, I can no longer access the router’s superadmin panel. Previously, navigating to http://192.168.7.1/superadmin worked, but now it consistently returns a 406 Not Acceptab

Firmware UpdateSuper admin

By Nishkarsh · Latest post Wednesday by TomasChott

5Helpful

860Views

5Replies

Easymesh compatibility between xx530v V1 and ax12 router

I have a tp link xx530v v1 router setup as fiber directly connected to it with ISP bsnl in india as it has easymesh support i want to know whether it is possible to create an easymesh between xx530v a

EasyMeshBSNL

By Ajmal_siraj · Latest post a week ago by terziyski

5Helpful

319Views

4Replies

SolutionXX530v is capped at 50Mb download in a 500Mb plan

I installed this device in my house, put fiber directly on it, it registered without issues. But I noticed a odd issue: Any download is always capped at 50Mb/s (my plan is 500Mb/s for both downloads a

By Rabatonfr · Latest post a week ago by LTelis

71Helpful

17296Views

122Replies

XX530v V2 issues

List of problems on the XX530v V2 platform with firmware 0.3.0 3.1.10 v6107.0 Build 250425 Rel.71973n USB sharing - by default XX530v (same for XX230v) has turned ON USB sharing with port 8443, same p

Firmware UpdateWeb GUI ManagementInstallation

By TomasChott

0Helpful

122Views

0Replies

Lan Ports stop working on TP Link XX530V AX 3000 router when I insert Airtel Patch Cord

I was enjoying TP-Link XX530V XPON as the main OLT (a Direct Patch Cord from Airtel was inserted into the XX530V Airtel Nokia Router, which was shut down). Inernet over Wi-Fi and LAN was working fine

By AlokJain · Latest post 2 weeks ago by Oak_01

4Helpful

902Views

5Replies