Smart Home Community > Kasa Smart Plugs > HS100 - attached devices still have power when the smart plug is turned off
< Kasa Smart Plugs

HS100 - attached devices still have power when the smart plug is turned off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS100 - attached devices still have power when the smart plug is turned off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HS100 - attached devices still have power when the smart plug is turned off
HS100 - attached devices still have power when the smart plug is turned off
2017-12-19 23:18:04
Model :

Hardware Version :

Firmware Version :

ISP :

I'm hoping there's a solution to this and not a faulty product that isn't even 1 year old.

No matter whether I turn the smart plug on or off, the devices attached to it remain on at all times. I have tried to remove the device from the network and re-add it to no avail.

Is there anything else I can try?

Thanks,
Dan
  4      
 
  4      
 
#1
Options
3 Reply
Re:HS100 - attached devices still have power when the smart plug is turned off
2019-08-14 12:11:52

I have a similar problem with my HS100. 

 

Model: HS100(EU)

 

Hardware Ver.: 3.0

 

The socket does not switch off. If the socket is switched on and I press the button on the socket, the light goes out at the socket, and I also hear the relay click, but the socket continues to supply power. When I control the plug from the Google Home or Kasa App, the same thing happens. The LED in the socket goes off and you can hear the relay switching, but the socket doesn't turn off the power. I've reset the socket several times and set it up again, which didn't help.

  9  
  9  
#2
Options
Re:Re:HS100 - attached devices still have power when the smart plug is turned off
2019-08-15 08:38:00
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:HS100 - attached devices still have power when the smart plug is turned off
2021-08-15 18:32:00

@nutman I have the same problem. Noticed just now. How do you solve this problem?

  0  
  0  
#4
Options

Information

Helpful: 4

Views: 4563

Replies: 3

Related Articles
 HS100 will not power any device
1639 0
 HS100 not switching off power
13087 0
 HS100 Does not cut power off completely
804 0
 HS100 lost date after power off
779 0
 LED floodlight connected with HS100 and HS110 still
464 0
 HS100 changes IP after loss of power
768 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.