Wiring HS200 Smart Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wiring HS200 Smart Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wiring HS200 Smart Switch
Wiring HS200 Smart Switch
2020-04-01 18:10:09
Model: HS200  
Hardware Version: V1
Firmware Version:

Hello,

 

I am in the process of wiring the HS200 switch. I have removed the old light switch, but now I have a small issue.  The switch itself has 4 wires, 2 positives (black) , a negative (white), and neutral (copper).  Coming from the wall, I have one positive (black), one negative (white) and a neutral (bare copper). How do I wire this together?

  0      
  0      
#1
Options
1 Reply
Re:Wiring HS200 Smart Switch
2020-04-01 19:43:03

Unfortunately you can't.  You need 4 from the wall - black (line in), white (neutral in), and another black (load out) and another whilte (neutral out).  The bare copper is for ground.

That switch is likely wired with a white as line in (it should be marked with a black stripe or tape) and black as load out.  You'll need to run a neutral wire for a smart switch to work.

AutomationManager: Secure home automation without relying on cloud servers.
  0  
  0  
#2
Options