KC200 settings keep changing

KC200 settings keep changing
KC200 settings keep changing
2020-04-23 11:39:30
Model: KC200
Hardware Version: V1
Firmware Version: 2.2.36

I have 2 of these cameras.

In order to capture people approaching my door I have "Sensitivity" set at 3 and "Record motion that lasts" at 0.5 seconds.

 

Quite often I'll realise that I haven't received a notification & no motion has been recorded - annoying if I miss a delivery for example.

 

When this happens I check the settings and both cameras have changed to "Record motion that lasts" 1 second. Which is far too slow to capture motion.

 

They aren't updating so why might these settings change themselves?

0
0
#1
Options
2 Replies
Re:KC200 settings keep changing
2020-04-26 08:23:43

@7hom  Hello, for this issue, please refer to the related post below.

https://community.tp-link.com/en/home/forum/topic/199388

1
1
#2
Options
Re:KC200 settings keep changing
2020-04-26 08:53:23
Thank you for the quick reply. I will follow the other threads’ progress and sit tight for a firmware upgrade.
0
0
#3
Options
Related Articles