Some of the Tapo C200 Cameras Keep Disconnecting from Home Wifi and appears to be Offline
Hi
I have 4 tapo C200 cameras installed in my home. All of them have been updated with the latest firmware 1.0.17. I am using Singtel Mesh router with Mesh nodes in all the rooms. Wifi connection are pretty stable in the entire house. There is one standardize SSID which is used for all the 4 cameras and the entire house. I realise that after a few hours, 1 or 2 cameras seems to be suddenly disconnected and appear offline. I have to manually power off and on the camera switch to let it reboot and then it gets connected back to the wifi network again. Can you advise what should I do so that all my 4 cameras will be online 24/7? My mesh router is dual band. Does turning off 5Ghz helps since the cameras can only support 2.4Ghz? Should I use Dynamic or Static IP address? Any router config to prevent disconnection?
Appreciate your help.
Thanks
Kc
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I have the same problem after any power failure c310 is unable to connect to Deco mesh sometimes it also just diconnect randomly and have no option to connect again ...
I always have to reset it few times in order to work. This is just a joke that it does not work with TP LINK DECO as it should.
- Copy Link
- Report Inappropriate Content
@seweryn If you have TP Link Deco, I managed to get the connection drop issue with C210 fixed. Go to the Deco app, select the devices and disable Mesh setting. Also add the devices to permanent IP list
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
edisedi777@gmail.com
- Copy Link
- Report Inappropriate Content
@CCTV1 thank You!!! I will test it out
- Copy Link
- Report Inappropriate Content
Information
Helpful: 25
Views: 57505
Replies: 90