Suggestion: add debounce to lightswitch firmware

Suggestion: add debounce to lightswitch firmware
Suggestion: add debounce to lightswitch firmware
2021-02-27 22:23:25
Model: HS200
Hardware Version: V2
Firmware Version: 1.5.7

I have seven HS200 switches, and most of them work properly. However, two of them are difficult to toggle manually. When I press the switch, it will quickly turn on and then immediately off as I lift my finger.

 

I suspect that I'm not the only user who is experiencing this problem, so my suggestion is to add a setting for debounce in a firmware update. This would enable users to set a period of time after the switch is physically pressed before it will register a second press, and eliminate the on-off behaviour.

 

This could also be accomplished by adding the double-press setting available in the HS200, with an option to ignore the double-press so that it doesn't toggle the switch twice.

 

Thanks!

1
1
#1
Options