Smart Home Community > Tapo Smart Sensor > T310 temp. sensor - P100 plug control - not turn on in an effective time
< Tapo Smart Sensor

T310 temp. sensor - P100 plug control - not turn on in an effective time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T310 temp. sensor - P100 plug control - not turn on in an effective time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T310 temp. sensor - P100 plug control - not turn on in an effective time
T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-03-05 10:40:33
Model: Tapo T310  
Hardware Version: V1
Firmware Version: 1.3.0 Build 220830 Rel. 161031

Hello,

I want to use T310 to control humidity with P100 and connected dehumidifier. If the effective time is set to always, everything works correctly. However, if I don't want the dehumidifier to disturb me at night and I set the effective time, for example, from 8:00 am and the humidity is higher than the set, the P100 plug will not turn on. And even when the humidity keeps rising. However, if the humidity drops below the set value and rises again, the P100 plug will turn on correctly.
This is very unfortunate.

Pavel

  0      
 
  0      
 
#1
Options
7 Reply
Re:T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-03-06 07:02:28

  @PavelV 

 

If there are multiple prerequisites, multiple (Smart Action) automation entries can be created to meet the requirements.

 

E.g.

- When T310 humidity exceeds 80%, then Turn ON P100.  

- When T310 humidity lower than 50%, then Turn OFF P100.  

 

If there is no action required to be taken (e.g. not turn on/off P100), you don't have to create the automation entries. 

 

How to create Smart Action (automation or a shortcut) of my Tapo devices

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#2
Options
Re:T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-03-06 09:56:56 - last edited 2023-03-06 09:59:09

  @Wayne-TP  Hello,

we do not understand each other. I have the automatic set, but if the humidity exceeds the set threshold and only then the effective time starts to apply, the P100 will not turn on.

I solve another problem here: https://community.tp-link.com/en/smart-home/forum/topic/590124 - not working "All conditions are set".

Pavel

  0  
  0  
#3
Options
Re:T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-03-06 16:27:59 - last edited 2023-03-06 16:29:37

  @Wayne-TP 

Hello,

I have it set up like this. If the humidity exceeds 65% outside the effective time, the P100 plug will not turn on. If the effective time is always, the switching works correctly.

Pavel

 

  0  
  0  
#4
Options
Re:T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-03-07 09:52:48

  @PavelV 

 

Thank you for the clarification. To better assist with this problem, we have created a support ticket TKID230311450 for you, the senior engineer will take over the case and help to look into it. Please check your mailbox and confirm, thank you!

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#5
Options
Re:T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-04-04 18:57:25

  @Wayne-TP 

Hello,

I have the same problem. Does exist any solution?

Thanks

Jiri

  1  
  1  
#6
Options
Re:T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-04-06 08:49:33

  @Wayne-TP 

hey can you please provide the solution even i was facing this issue

Barcode Label Maker by: https://www.barcodelabelmaker.org
  1  
  1  
#7
Options
Re:T310 temp. sensor - P100 plug control - not turn on in an effective time
2023-04-11 09:23:24

  @jirisv @winnifred 

 

To better assist with the problem, please start a new thread with detailed information about your Tapo product, smart action setup and the problem you're facing (Which rule does not take effect under what circumstances). 

 

If you have performed any comparison tests, please provide the details and results as well.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1304

Replies: 7

Related Articles
T310 , trigger when temp is below a certain value
563 0
 KE100 useless without remote T310 remote temp sensor.
549 0
T300 water sensor How can I turn on a plug when alarm is triggered
328 0
T310 sensor not recording low temperatures
468 0
 Previous Day temp graphs on t310
200 3
 KE100 and T310 temp sync issue
217 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.