HS210 and HS200 both flashing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS210 and HS200 both flashing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HScottBuck

2023-11-17 19:01:06 - last edited 2023-11-19 19:01:57

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2023-11-17

HS210 and HS200 both flashing

2023-11-17 19:01:06 - last edited 2023-11-19 19:01:57

Model: HS210 HS200

Hardware Version:

Firmware Version:

I have 3 switches, 2 are HS210 and one is HS200. They have been installed and working for months. Yesterday one of the HS210 started blicking the lights continuously. This morning a second HS210 and an HS200 also started all blicking the lights continuously. Each are controling different lights.

I have shut power off to the light switches. If I restore power all three now immediately start blicking the lights.

Presumably, each is wired correctly since they have all been working without issue for months.

Any advise on what would cause this? And how do I fix it?

1 Accepted Solution

HScottBuck

LV1

2023-11-19 19:01:42 - last edited 2023-11-19 19:01:57

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2023-11-17

Re:HS210 and HS200 both flashing-Solution

2023-11-19 19:01:42 - last edited 2023-11-19 19:01:57

Update: Fixed. The issue was improper install. The switches were installed in the same box with 8 common wires (white) connected with a single wire nut. The wire nut was rated for 5 wires max and with 8 it eventually came apart. Fixed it by making sure all wires were corrected correctly per the wire nut ratings.

HS210 and HS200 both flashing

HS210 and HS200 both flashing

Information

Voters 0

Tags