12
Votes

Automation rule based on temperature should allow decimals for degrees

 
12
Votes

Automation rule based on temperature should allow decimals for degrees

Automation rule based on temperature should allow decimals for degrees
Automation rule based on temperature should allow decimals for degrees
2023-12-14 08:39:44
Model: Tapo T315  
Hardware Version: V1
Firmware Version: 1.8.0 Buold 230921 Rel. 091446

The creation of automation rules based on temperature should allow the use of a decimal value since the sensor displays temperature with a decimal point. There is no reason not to used that in the Tapo app to allow for a more precise temperature range where things should happen. I am attaching the screen where temperature selection happens and where it should allow a selection with a decimal point. Perhaps even a field where the user could manually input the value besides the slider would be a good addition to the application.

 

Thanks in advance for even considering this.

#1
Options
12 Reply
Re:Automation rule based on temperature should allow decimals for degrees
2023-12-26 07:41:26

Hello, I would also welcome this innovation in the app. If the app could work with decimals when setting up automazizations, I would purchase a lot more tapo products. 

#3
Options
RE:Automation rule based on temperature should allow decimals for degrees
2024-01-31 08:49:50
he creation of automation rules based on temperature should allow the use of a decimal value
#4
Options
RE:Automation rule based on temperature should allow decimals for degrees
2024-04-08 09:03:34
As said before and suggested by advertising. Also should be able to set an offset since the displayed value on mine actually isn't accurate (off by 2°) compared to two other classic thermometers.
#5
Options
Re:Automation rule based on temperature should allow decimals for degrees
2024-04-08 09:06:46

I don't know how many replies a topic like would need for the suggestion i made to be considered but this really seems like a stupid little problem that shouldn't cause a whole lot of work and allow a better use of a product which otherwise is pretty solid.

#6
Options
Re:Automation rule based on temperature should allow decimals for degrees
2024-04-08 13:39:46

  @Floriano42  Definetly a good feature. Hopefully it will get implemented.

#7
Options
Re:Automation rule based on temperature should allow decimals for degrees
2024-04-08 15:59:37
But why?
#8
Options
Re:Automation rule based on temperature should allow decimals for degrees
2024-04-08 16:59:16
Are you just trolling posts?
#9
Options
Re:Automation rule based on temperature should allow decimals for degrees
2024-04-08 17:13:39
What? You guys with your temperature control down to a decimal point of one °C look like trolls. I've seen these requests on Reddit from several fresh accounts and to me it looked like trolling. The KE100s can't even display decimals! Walk through a room and it changes it's temperature by one °C or open a door or a window! The KE100s are not made to control the temperature that precisely. And your feature request would complicate the whole system.
#10
Options
Re:Automation rule based on temperature should allow decimals for degrees
2024-04-08 18:30:58

  @aroedl I think the troll here it's you :) I don't know what model are you talking about but my temperature sensor displays it with a decimal and yes, since it allows rules to be set based on the detected temperature i would like, just because i should be able to, set a rule that things happen when temperature is below 21,5 degress or above 22,5 or even 22,1 just because i can see that temperature on the sensor. Instead of calling others trolls look in your own garden pal.

 

#11
Options
Re:Automation rule based on temperature should allow decimals for degrees
2024-04-09 08:09:16

  @Floriano42 Just like you say. yes

#12
Options

Information

Helpful: 12

Views: 672

Replies: 12

Voters 12

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 8 Voters