Smart Home Community > Tapo Smart Hub > Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell
< Tapo Smart Hub

Solution Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell

Solution Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell

SolutionTapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell
Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell
2023-12-18 03:17:02 - last edited Friday
Tags: #Smart Actions #Official
Model: Tapo H200   Tapo D230S1  
Hardware Version:
Firmware Version:

Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell

 

This Article Applies To 

Tapo D230

Tapo H200

 

 

Description

When configuring Tapo H200 as the second chime for Tapo D230 doorbell, you might notice that the "Ring Connected Hub" page lacks options to customize the number of rings and duration. Consequently, when someone rings the doorbell, the hub will only ring once. 

 

 

Workaround

While the engineering team is working on optimizing this feature,  creating automation will be a good idea to serve this purpose. 

 

Let's see how to make it work!

1. First, turn off "Ring Connected Hub" on Tapo D230.

2. Create an automation as below.

 

Trigger When Tapo D230 Doorbell Pressed
Action

Then Ring H200

Siren Duration >> e.g. 10 Seconds

Custom Siren Sounds >> e.g. Alarm 5

 

 
 

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  1      
 
  1      
 
#1
Options
3 Reply
Re:Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell
2025-07-21 17:19:59

  @Wayne-TP  Thanks for this.  Recently since last update my H200 hub has stopped ringing reliably when the D230 doorbell is pressed.  Sometimes it rings sometimes it doesn't (the doorbell trigger shows in the hub log and my phone notification always sounds but the hub chime does not always output any sound).   I have followed these steps to create an automation as a workaround so hopefully it will now ring every time again.

  0  
  0  
#2
Options
Re:Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell
2025-07-21 17:24:06

  @Wayne-TP Still getting same behaviour unfortunately.  Intermittent ringing of hub chime when doorbell pressed.  Have tried reboots with no effect.  Any ideas?

  0  
  0  
#3
Options
Re:Tapo Hub H200 Only Rings Once When Pressing Tapo D230 Doorbell
2025-07-21 17:57:30

  @Wayne-TP In the clip settings of the D230 I have reduced the record buffer and clip length to the min and increased the re-trigger time.  This seems to have improved the issue with the hub not ringing with a few quick tests but it could be a coincidence.

 

  0  
  0  
#4
Options

Information

Helpful: 1

Views: 1878

Replies: 3

Tags

Smart Actions Official
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.