ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-12 09:29:36 - last edited 2024-01-30 02:35:05
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.3 Build 20240112 (Beta)

This Article Applies to:

 

ER605(UN) V2 2.2.3_Build 20240112 (Beta)

 

Release Notes:

 

New Features & Enhancements:

 

1. Add support for Deep Packet Inspection.
2. Optimized logic for Auto IPsec to select WAN port.

 

Bug Fixed:

 

1. Fixed several security vulnerabilities.
2. Fixed the bug of slow speed of IPsec VPN.

 

Firmware Download:

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways

 

Firmware Download Link

ER605(UN) V2_2.2.3_Build 20240112 (Beta)

Notes:

(1) The above firmware is applied to ER605 V2/2.6.

(2) Your device’s configuration won’t be lost after upgrading.

(3) Please make sure the firmware version before upgrading is ER605(UN)_V2_2.2.3 Build 20231201, otherwise the firmware upgrade will fail.

 

Additional Information

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the ER605 router upgrade, it's suggested to contact us with the following info:

  • Omada Controller version 
  • Device Firmware version with Build number (previous and current)

 

If your ER605 router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

How to use the Emergency Mode to recover the firmware for Omada Gateways

 

Update Log:

 

Jan 12th, 2024:

Release of this post.

 

Recommended Threads:

 

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  2      
  2      
#1
Options
31 Reply
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-12 20:52:38

  @Clive_A 

 

Updated 10 of my remote sites and DPI is working like usual.  

 

No Issues upgrading.  All is working so far.  

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-13 01:56:10

  @KimcheeGUN How to enable DPI in Omada oc200 controller?

  0  
  0  
#3
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-13 08:27:08

  @Clive_A 

 

Upgraded 3 remote site, 

absolutely no problems with the upgrade. everything seems to work as well

and VPN site to site has become even faster. it is absolutely incredible how fast this router is with ipsec sit to site.

  0  
  0  
#4
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-13 08:37:12

ceejaybassist wrote

  @KimcheeGUN How to enable DPI in Omada oc200 controller?

  @ceejaybassist 

 

Network security and application control

 

I don't have a hardware controller myself, but I think I remember reading that hardware controllers don't have this function.
so if you can't find it, that's probably why.

 

 

 

 

 

 

 

  0  
  0  
#5
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-13 08:45:03

  @MR.S oh. I hope they will implement the DPI also in the hardware controllers. Just like with ER605 v2, which they said before that its hardware does not support it, so I am still hoping to be implemented in the hardware controllers.

  0  
  0  
#6
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-14 06:25:05

  @ceejaybassist yeah its in the latest notes for the beta controller;

3. DPI: Added support for Deep Packet Inspection in Site view > Settings > Network Security > Application Control, which helps you to manage your network traffic through Application Layer. (except the OC200 and OC300)

 

not sure about the reason, maybe its a work in progress and will be enabled in the final release..

  0  
  0  
#7
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-18 21:38:42
I have an unusual request - could someone with an ER 605 v2 router with Firmware Version: 2.2.3 Build 20240112 (Beta) installed show screenshots of what the new Deep Packet Inspection functionality looks like?
Thank you in advance
  0  
  0  
#8
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-21 09:06:47

@Clive_A Thank you for posting this beta firmware.
 

To describe my setup:

ISP with DUAL Stack, router with integrated cable modem. I'm able to set a switch port of the router to bridge mode to connect a separate router directly to the cable modem. The ISP then issues a second IPv4 address and give a IPv6 prefix /59.

With any other router like a openwrt or similar, this is working fine.

 

The ER605 instead is able to connect initially and gets a /59 prefix delegation but after a short while it drops this and IPv6 connectivity is lost for router and everything behind.

This is the case since I got this router one year ago to get started with Omada.

 

If I connect the ER605 to the router/cable modem (without bridge mode), I get a prefix fine and stable.

 

How can I help TP-Link to debug and finally fix this.

 

  0  
  0  
#9
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-22 08:01:41 - last edited 2024-01-22 08:05:25

Hi @Goetz

Thanks for posting in our business forum.

@Clive_A Thank you for posting this beta firmware.
 

To describe my setup:

ISP with DUAL Stack, router with integrated cable modem. I'm able to set a switch port of the router to bridge mode to connect a separate router directly to the cable modem. The ISP then issues a second IPv4 address and give a IPv6 prefix /59.

With any other router like a openwrt or similar, this is working fine.

 

The ER605 instead is able to connect initially and gets a /59 prefix delegation but after a short while it drops this and IPv6 connectivity is lost for router and everything behind.

This is the case since I got this router one year ago to get started with Omada.

 

If I connect the ER605 to the router/cable modem (without bridge mode), I get a prefix fine and stable.

 

How can I help TP-Link to debug and finally fix this.

I think I might run into this before. Is this prefix given by your ISP?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#10
Options
Re:ER605 V2_2.2.3 Build 20240112 Beta Firmware for Omada Controller V5.11 (Released on Jan 12th, 2024)
2024-01-22 08:18:15 - last edited 2024-01-22 08:18:56

Hi @djwujek 

Thanks for posting in our business forum.

djwujek wrote

I have an unusual request - could someone with an ER 605 v2 router with Firmware Version: 2.2.3 Build 20240112 (Beta) installed show screenshots of what the new Deep Packet Inspection functionality looks like?
Thank you in advance

From ER8411, screenshots.

 

 

 

 

 

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#11
Options