Business Community > Switches > VLAN set-up
< Switches

VLAN set-up

VLAN set-up

VLAN set-up
VLAN set-up
2024-02-17 17:45:51 - last edited 2024-02-22 01:13:21
Tags: #VLAN & Multi-Networks #Configuration #Trunk
Model: TL-SX3008F   TL-SG3428  
Hardware Version:
Firmware Version:

Hi all,

I have:

  • TL-SG3428 V2.0 firmware: 2.0.11 Build 20230602
  • TL-SX3008F V1.0 firmware 1.20.0 Build 20231011
  • Both PC have 2 NICs

 

Basically what I wish to archive is:

  • VLAN for managment
  • VLAN for enddevices
  • Other VLAN

 

The problem is that I can't recive a DHCP form my router for the VLAN30. Also if I assing a static IP at PC-A or PC-B I can't connect to the internet.

There are no missconfig in router side couse if I delete the trunk between the 2 swithces and I assing only VLAN30 everyting works

 

Hope some of you could help me,

Thanks in advance

 

 

 

 

 

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:VLAN set-up-Solution
2024-02-21 02:57:36 - last edited 2024-02-22 01:13:30

  @xHAWAKx 

Same thing to the uplink of the other switch.

Keep the downlink untagged, PVID 30.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  1  
  1  
#4
Options
Re:VLAN set-up-Solution
2024-02-21 18:31:31 - last edited 2024-02-22 01:13:21

  @Clive_A 

 

It seems like that your suggestion does work!

Port 2/3 are for PCA & PCB port 23 is the router port 28 is the uplink to the second switch

 

 

For PVID nothing change from my last post

 

The second switch is configure as below

 

 

 

PC A&B are on port 2-3 the trunk is on port 8

 

Thank you so much!

 

 

Recommended Solution
  1  
  1  
#5
Options
4 Reply
Re:VLAN set-up
2024-02-18 05:58:33

Hi @xHAWAKx 

Thanks for posting in our business forum.

Based on the screenshots you provided now, I assume you are using port 8 as the uplink on 3008F? 28 is the downlink to 3008F?

Forget about the config on the 3008F because it is not related to this setup, what is the screenshot for PVID?

PC A and B are connected to 2 and 3?

What about the other VLANs? Config in untagged/tagged?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#2
Options
Re:VLAN set-up
2024-02-20 18:13:17

Hi,  @Clive_A 

basically the trunk is between the port 28 and port 8

 

PVID of the SG3428 are below.

For the moment I prefer to focus in the VLAN 30 because the problem is here

 

 

  0  
  0  
#3
Options
Re:VLAN set-up-Solution
2024-02-21 02:57:36 - last edited 2024-02-22 01:13:30

  @xHAWAKx 

Same thing to the uplink of the other switch.

Keep the downlink untagged, PVID 30.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  1  
  1  
#4
Options
Re:VLAN set-up-Solution
2024-02-21 18:31:31 - last edited 2024-02-22 01:13:21

  @Clive_A 

 

It seems like that your suggestion does work!

Port 2/3 are for PCA & PCB port 23 is the router port 28 is the uplink to the second switch

 

 

For PVID nothing change from my last post

 

The second switch is configure as below

 

 

 

PC A&B are on port 2-3 the trunk is on port 8

 

Thank you so much!

 

 

Recommended Solution
  1  
  1  
#5
Options

Information

Helpful: 0

Views: 261

Replies: 4

Tags

VLAN & Multi-Networks Configuration
Trunk
Related Articles
Setting up multi VLAN on TL-SG2008P and 2 x EAP670
1279 0
VLAN Set-up
194 0
VLAN not working for WLANs
128 0
Setting up native VLAN doesn't work - Packet Capture possible?
269 0
Trouble getting VLAN working for Access Points
150 0
set up
413 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.