Home

Forums

Stories

Knowledge Base

Smart Home Community > Tapo Smart Sensor > Tapo T110 is unresponsive

< Tapo Smart Sensor

Tapo T110 is unresponsive

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo T110 is unresponsive

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Lobbo

2024-05-13 11:51:19 - last edited 2024-05-20 01:08:00

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-05-13

Tapo T110 is unresponsive

2024-05-13 11:51:19 - last edited 2024-05-20 01:08:00

Model: Tapo T110

Hardware Version: V1

Firmware Version: 1.9.0 build 230704 Rel.154559

Hi,

My Tapo T110 becomes unresponsive and will not send open/close messages.

Signal strength reported by the T110 = -51 RSSI, interference = -112rssi.

Connected to H200 hub with firmware 1.3.2 build 20240424 rel.7542.

Hub to T110 approx 3.5m with no line of site issues.

Resetting the T110 makes it responsive but 30 mins later no messages are triggered from open/ close events

Can anyone advise troubleshooting tips.

1 Accepted Solution

Wayne-TP

2024-05-14 09:06:14 - last edited 2024-05-20 01:08:00

Posts: 3498

Helpful: 657

Solutions: 972

Stories: 12

Registered: 2020-06-23

Re:Tapo T110 is unresponsive -Solution

2024-05-14 09:06:14 - last edited 2024-05-20 01:08:00

@Lobbo

What's the signal strength of the H200 (device's settings ->Network connection)? Is the H200 wired or wirelessly connected?

Is any event recorded in T110's event log?

Can you share a picture of your automation settings here?

More on Smart Action (Automation/Shortcut) Doesn't Take Effect.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.

Recommended Solution

1 Reply

Wayne-TP

2024-05-14 09:06:14 - last edited 2024-05-20 01:08:00

Posts: 3498

Helpful: 657

Solutions: 972

Stories: 12

Registered: 2020-06-23

Re:Tapo T110 is unresponsive -Solution

2024-05-14 09:06:14 - last edited 2024-05-20 01:08:00

@Lobbo

What's the signal strength of the H200 (device's settings ->Network connection)? Is the H200 wired or wirelessly connected?

Is any event recorded in T110's event log?

Can you share a picture of your automation settings here?

More on Smart Action (Automation/Shortcut) Doesn't Take Effect.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.

Tapo T110 is unresponsive

Tapo T110 is unresponsive

Information

Voters 1

Tags