TamerSalah wrote

at smartthings the energy tab cant pick tapo matter plug and shows as not supported 

@TamerSalah That's not Tapo fault actually. The SmartThings Energy service could display the energy information of Matter 1.3 plugs if they wanted, but currently they limit the feature to a handful of vendors and devices that have commercial partnerships with. So it's not a technical reason, the Tapo plug is fine, it's just a business decision.

Sure, Tapo could go through those agreements with SmartThings so they allow the plug via Matter into the Energy tab, just like they did with the cloud integration but... can't blame them if they don't want to double-dip when their device is already Matter 1.3 certified and that should be enough.

  @whereisaaron my concern about energy export that remain 0 always , with official integration you can find daily and monthly energy which give accurate results , i know i can use ha energy management to get those results but at smartthings the energy tab cant pick tapo matter plug and shows as not supported 

  @Cammm great, I found it + working like a treat. Thanks!

MarkCarline wrote

  @mocelet - Wher can i find your alternative edge driver for these plugs ?  Thanks

@MarkCarline In the SmartThings Community, the post is called "[Edge] Matter Playground". This forum doesn't allow linking to SmartThings since it considers it spam, but since I mentioned it in a reddit comment maybe that one is allowed, so check this comment: https://www.reddit.com/r/Tapo/comments/1md08fs/comment/n5ybrj8/ 

You can always google for "smartthings community edge matter playground" and it should be the first result.

  @mocelet - Wher can i find your alternative edge driver for these plugs ?  Thanks

  @whereisaaron 

So managed to grab a few minutes to look at the four way version of the plug, this one: 

Tapo P304M

And it doesn't have this new firmware yet for matter power monitoring. Looks like it'll be on this link when it does:

https://www.tp-link.com/uk/support/download/tapo-p304m/#Firmware-Release-Notes

@MarkCarline that P304M would be perfect... if it were Aus/NZ/China sockets, rather than British ones 😭

I'm very jealous! I didn't realise the P304M had per-socket power monitoring, I thought it was for the whole board, so this with Matter 1.3 is awesome.

Sadly in Australia TP-Link are still only selling the old 3-socket P300 with proprietary Tapo cloud software. It has no power monitoring and the USB ports are always on. I can only dream that it won't take too long to see the equivalent product to P304M in Australia. The Tapo P300 is basically unchanged from the old Kasa KP303 power strip. Nice build quality, looks better build quality to P304M actually, but no power monitoring and no Matter support.

  @whereisaaron 

Will this do what you want? I think the new firmware might be released the same as the single plug

TP-Link Tapo P304M Smart Wi-Fi Extension:

(Google for Argos product as link not allowed)

Edit: I just purchased one from Amazon so will check out anyway

Great to be able to use Matter to bring P110M data into Home Assistant! You get data every 10 seconds, which is quite fine grained. You can see this panel heater's "interesting" approach to heating the element. Not what you might expect. Looking like it has two 1,000W elements that each are either 100% on or 100% off.

Thank you TP-Link for a great Matter device! Now a P310M please, with 3 sockets, each with power measurement 🙏

@TamerSalah energy usage data is working for me with P110M and Home Assistant Energy Dashboard? After pairing the P110M to the Home Assistant Matter Server I can see the power monitoring cluster 'Energy' entity. I can then add that 'Energy' entity as an "Individual Device" to the Home Assistant Energy configuration which are included in the daily, monthly energy calculations. Do you mean something different by "data export"?