Business Community > WiFi > EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
< WiFi

EAP225outdoor wireless mesh disconnected/not even visible/adopt failed

EAP225outdoor wireless mesh disconnected/not even visible/adopt failed

EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Saturday
Tags: #Installation #Mesh #disconnected
Model: EAP225-Outdoor   EAP655-Wall   EAP772  
Hardware Version: V1
Firmware Version: 5.1.6

Hi,

 

my new toys (see pic) bring me some unexpected headache.
first the EAP225 was visible and adopted without any issue. later they connected in strange ways... in a chain or all to one of the wired EAPs even it there is a other EAP more near and with better signal.
now they refuse to stay connected of the adopt even works most of the time it fails.
rebooting/powercycling  (also the OC200 and the wired EAPs) and also factory resetting the 225's don't change anything

now i moved them back in and put them within 1m of the wired EAPs and they still don't work ... whole setup is only a few weeks old

 

did i miss some incompatibility with this devices?

Is there something wrong with this setup expect the wrong brand switch :) I wrote already a letter to Santa about a correctly branded switch :)

 

Regards

ASD

 

  0      
 
  0      
 
#1
Options
7 Reply
Re:EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Saturday

  @ASD_AuZ 

 

you need to see what channels you have on the different access points, if the outdoor access point is set to outdoor mode it will only operate on channel 100 and above (EU) if your other access point is on e.g. channel 40 they will never be able to talk to each other

 

  0  
  0  
#2
Options
Re:EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Saturday - last edited Saturday

  @ASD_AuZ 

 

And EAP655-wall don't support mesh. 

 

  0  
  0  
#3
Options
Re:EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Saturday

  @MR.S 
Thanks for your reply. ill give this a try ... actually i did exactly the dumb stuff and thought maybe DFS making me the headache so i forced them to non DFS :(

  0  
  0  
#4
Options
Re:EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Saturday

  @MR.S 

 

hmmm https://www.tp-link.com/en/omada-mesh/product-list/ says it does

  0  
  0  
#5
Options
Re:EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Yesterday

  @ASD_AuZ 

 

ok, maybe then :-) it doesn't say that they have omada mesh in the specification.

  0  
  0  
#6
Options
Re:EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Yesterday

  @MR.S 

thanks again for your hint it was in the right direction... now lets see if the connection stay stable as i now have locked the wired APs to channels >100

  0  
  0  
#7
Options
Re:EAP225outdoor wireless mesh disconnected/not even visible/adopt failed
Yesterday

  @ASD_AuZ 

 

I think it works really well, one of my kids has an EAP225-Outdoor meshed to an EAP620 HD and it just works. never any problems

 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 80

Replies: 7

Tags

Installation Mesh
disconnected
Related Articles
EAP660 wireless mesh connected to a netgear switch
520 0
Wired vs. wireless uplink / mesh enforcement
155 0
2 EAP225-Outdoor in MESH?
930 0
Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....
543 0
EAP wireless bridge (Mesh)
851 0
EAP620 HD v3.2 support for mesh wireless connection between APs?
438 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.