Smart Home Community > Tapo Smart Camera > Nc200 getting video stream password and user name will not work
< Tapo Smart Camera

Nc200 getting video stream password and user name will not work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Nc200 getting video stream password and user name will not work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Nc200 getting video stream password and user name will not work
Nc200 getting video stream password and user name will not work
2015-06-28 21:18:32
Region : UnitedKingdom

Model : NC200

Hardware Version : V1

Firmware Version : 2.0.11

ISP :

I Have tried using the Username and password supplied in another thread and it will not work in VLC.
I have tried all of these to try and make it work but it will not.:

http://admin:YWRtaW4=@192.168.0.101:8080/stream/getvideo

http://192.168.0.5:8080/stream/getvideo with admin and YWRtaW4= in the Username and Password boxes respectively and it just pops another box for username and password up.

I have also tried using my own username and password for the web interface login but those don't work either.

What do i do?
  0      
 
  0      
 
#1
Options
14 Reply
Re:Nc200 getting video stream password and user name will not work
2015-06-30 15:18:56
How did you access it? What kinds of box poped? Provide related screenshots.
If it is convenient for you to reset the camera directly, you can try.
  0  
  0  
#2
Options
The password need to have base64 coding
2015-07-01 19:07:40
your password need to be encoded by base 64, you can convert from here : https://www.base64encode.org/

e.g admin/admin => admin/YWRtaW4=
  0  
  0  
#3
Options
Re:Nc200 getting video stream password and user name will not work
2015-07-01 19:11:48
the password need to be encoded by base64, you can convert via https://www.base64encode.org

e.g admin -> YWRtaW4=
  0  
  0  
#4
Options
Re:Nc200 getting video stream password and user name will not work
2015-07-07 14:30:37
Thanks everyone. This works great now with ispy for all of my security recording needs.

Now to get audio streaming working too.
  0  
  0  
#5
Options
Re:Nc200 getting video stream password and user name will not work
2015-07-22 13:24:12

Jam wrote

Thanks everyone. This works great now with ispy for all of my security recording needs.

Now to get audio streaming working too.


Hi Jam, what type of video source did you set for iSpy? I can't get this camera to work with iSpy any which way. Tried as JPEG, MJPEG and FFMPEG. I'm using the url suggested above (adjusted for my camera's ip address) and base64 encoding the password. All I get is an error no connection. The camera is operating correctly. I can see video using the web browser and web interface.
  0  
  0  
#6
Options
Re:Nc200 getting video stream password and user name will not work
2015-07-23 01:37:00

robbage wrote

Hi Jam, what type of video source did you set for iSpy? I can't get this camera to work with iSpy any which way. Tried as JPEG, MJPEG and FFMPEG. I'm using the url suggested above (adjusted for my camera's ip address) and base64 encoding the password. All I get is an error no connection. The camera is operating correctly. I can see video using the web browser and web interface.


I used the VLC plugin to make it work.

Here is a guide.
http://www.ispyconnect.com/userguide-vlc.asp

Check that you can get the camera working in VLC or MPC 1st then use the address as per the guide in ispy.
  0  
  0  
#7
Options
Password not working
2016-02-26 04:01:21
I'm sorry to reopen this thread but I just bought a NC200 camera, and tried accessing the streaming video through:

http://192.168.15.3:8080/stream/getvideo

and I am entering user: admin password: YWRtaW4=

However, I get the same login window over and over again.

Did the password change for newer cameras or what am I doing wrong?


Thank you.
  0  
  0  
#8
Options
Re:Nc200 getting video stream password and user name will not work
2016-09-28 03:56:51
I can "download" stream using Chrome with previously mentioned:
http://192.168.15.3:8080/stream/getvideo

and I am entering user: admin password: YWRtaW4=

Stream is MJPEG over HTTP. VLC can't play this file correctly.
Stream can be played with FFmpeg player.
  0  
  0  
#9
Options
Re:Nc200 getting video stream password and user name will not work
2016-09-29 09:53:40

Jam wrote

I used the VLC plugin to make it work.

Here is a guide.
http://www.ispyconnect.com/userguide-vlc.asp

Check that you can get the camera working in VLC or MPC 1st then use the address as per the guide in ispy.


In my case,VLC (or ISPY,or ISPY + VLC Plugn) can't open stream. Login/Password(Base64-encoded) was correct.
Seems some problems with "MJPEG over HTTP" protocol.
Found @ codeproject.com MJPEG streamer shows me, that Chrome recognize and support (visualize) MJPEG streaming without any special plugin.
Also, FFMPEG can correctly decode stream, saved from NC200 camera.
Finally, i googled to "Xeoma" software, that can connect to this camera with no problems (using paths http://IPOFCAMERA:8080/stream/getvideo).
  0  
  0  
#10
Options
The password need to have base64 coding
2021-04-15 03:51:11
Can I use Kinemsater Pro to edit my gaming Stream videos to share on Facebook?
  0  
  0  
#12
Options
12

Information

Helpful: 0

Views: 5606

Replies: 14

Related Articles
Camera NC200 - Wats the URL (address) for video stream?
4351 0
 Accessing nc200 stream
1752 0
 IP Camera NC200 - Wats the URL (address) for video stream?
5349 0
 video stream
799 0
 live stream on facebook with nc200
718 0
RTSP user and password
691 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.