VPN no internet, Wireguard VPN Client do not pass anything on BE3600
Hi,
I recently bought a new TP-Link BE3600 router to be able to use wireguard client as well.
VPN Client does not work but when I set the wireguard config on the iPhone app, it works perfectly,
but when I set it up in the router, it said "connected", but I add a device to it when wireguard client is on,
but no traffic will pass through that device anymore.
The VPN server does not work properly on the router either.
Remote devices connect the VPN Server successfully but cannot access internet any more.
The VPN provider: Cloudflare WARP
Country/region: Hungary
The VPN Server works on all devices only on the router doesn't work.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for contacting our community.
May I know what is the model number of your device? Please refer to
How to find the model number of your TP-Link device
How to find the hardware version on a TP-Link device
Please provide more details about your issue, like:
What type of VPN are you using? A WireGuard VPN client or a WireGuard VPN server?
What error message are you getting?
Who is your VPN provider? What country/region is the client located in? Please make sure you have completed the configuration correctly (you can check whether the username and password are entered correctly)
Please confirm whether the VPN server is working properly. You can set up VPN clients with the same configuration information on different devices to access the VPN server for testing.
Thank you~
- Copy Link
- Report Inappropriate Content
Hi@Bubu007,
Thank you for contacting our community.
We have received your feedback and escalated your issue to an engineer. The case ID is TKID250426621. It is recommended that you can continue to communicate with engineer via ticket.
I will also contact the engineer to wait for your reply.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Is there any update on this?
My new router seems to have the exact same issue with the same hardware and firmware :(
- Copy Link
- Report Inappropriate Content
Thank you for contacting our community.
May I know what is the model number of your device? Please refer to
How to find the model number of your TP-Link device
How to find the hardware version on a TP-Link device
Please provide more details about your issue, like:
What type of VPN are you using? A WireGuard VPN client or a WireGuard VPN server?
What error message are you getting?
Who is your VPN provider? What country/region is the client located in? Please make sure you have completed the configuration correctly (you can check whether the username and password are entered correctly)
Please confirm whether the VPN server is working properly. You can set up VPN clients with the same configuration information on different devices to access the VPN server for testing.
Thank you~
- Copy Link
- Report Inappropriate Content
I have exactly the same problem, you will find that devices that use Ethernet work fine with the wireguard, only wifi devices have the problem. Had contact with an engineer that installed a development firmware and extracted all the traffic during the problems.
He contacted me back 2 days ago that they had found the firmware problem and they are working on a solution, there should be a new (maybe beta) firmware soon.
- Copy Link
- Report Inappropriate Content
@DutchMike
Any updates on this as I too have the same issue with devices connected over wifi are not working with the wireguard VPN but ethernet connected devices are fine.
- Copy Link
- Report Inappropriate Content
Yes i have had a test session with a support technician from TP-Link and they have identified the problem. Recently received an Beta firmware for my router from them which solves the problem and has been stable for the 3 or so days that i have had it running.
I am not sure if i am allowed to share this firmware and it's also specific to the BE230 V1.20 that is sold in Thailand, which seems to be the Hong Kong version as far i can see.
According to tp-link support the solution will be in the next stable firmware that will be released.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I am not having that version, but still facing the same issue below are my router details.
Firmware Version
1.1.4 Build 20250318 rel.31873(4555)
Hardware Version
Archer BE230 v1.0
When can we expect the next stable release?
- Copy Link
- Report Inappropriate Content
@Bubu007 check that config file has DNS = 8.8.8.8 for instance
- Copy Link
- Report Inappropriate Content
mankud wrote
When can we expect the next stable release?
This seems to finally have been fixed for my Archer BE230 v1.0 in firmware version 1.2.1 Build 20250804 rel.79639(4555)!
Not necessarily related to this issue, but probably worth mentioning nonetheless: my landlord's DNS is (in hindsight obviously) no longer accessible through the VPN tunnel, so I had to configure 8.8.8.8/1.1.1.1 for that instead.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1293
Replies: 10
Voters 0
No one has voted for it yet.