Tapo C460 24/7 Recording Firmware
On the product page of the Tapo C460, the 24/7 recording is advertised to be coming out with an update in May and there is also a very detailed FAQ about it.
However, the latest firmware available, the 1.1.5, has been released in April and doesn't support the feature. This is very misleading.
Any news on that?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The 24/7 capture feature for Tapo C460 is added in the latest version 1.1.6, which is currently in stage rollout. If your device hasn't received it, please wait patiently, as the release scale will be expanded gradually until the full release.
- Copy Link
- Report Inappropriate Content
The 24/7 capture feature for Tapo C460 is added in the latest version 1.1.6, which is currently in stage rollout. If your device hasn't received it, please wait patiently, as the release scale will be expanded gradually until the full release.
- Copy Link
- Report Inappropriate Content
I've got C460 and C660 cameras - both are updated to enable 24/7 recording HOWEVER this does not seem to work with my H500 HomeBase - how do I solve this issue?
- Copy Link
- Report Inappropriate Content
LiamR86 wrote
I've got C460 and C660 cameras - both are updated to enable 24/7 recording HOWEVER this does not seem to work with my H500 HomeBase - how do I solve this issue?
The 24/7 capture feature is not compatible with the hub yet. To use this feature, put an SD card in the camera itself and enable its SD card storage.
- Copy Link
- Report Inappropriate Content
Hi,
Is there any news about the compatibility of the hub with the 24/7 capture feature?
Best regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for the information.
So now, with the latest firmware update, the ability to use the HDD/SDD from the H500 to save data (frames) of the 24/7 feature (from C460) has been enabled?
Just to make sure I understand correctly, since I currently have an H200...so as to avoid buying an H500 and SDD for nothing..
Is there a chance that the 24/7 data saving feature will also be activated on the H200?
Best regards
- Copy Link
- Report Inappropriate Content
No. 24/7 capture is not supported on H200 yet. Currently, you can use this feature when the videos are stored to the camera's microSD card, or when stored to the Tapo H500.
- Copy Link
- Report Inappropriate Content
I cannot enable TC92 24/7 Capture to H500 hub.
tc92: Hardware Ver: 1.0, firmware: 1.1.3
h500: hardware ver: 1.0, firmware: 1.3.4
error description:
For Tapo TC_92_xxx, 24/7 Capture cannot currently use hub storage. Please change the storage path.
"Go to storage settings" / "Cancel"
The H500 firmware 1.3.4 change log mentioned 24/7 Capture to hub being enabled. Nothing about TC92 24/7 capture to H500 not being available.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 689
Replies: 8
Voters 0
No one has voted for it yet.