D230 Green light always flashing.
My D230 doorbell worked without a problem until yesterday when for reasons unknown the green light flash's constantly and drains the battery. I have tried change of battery, reset, check WiFi and can find nothing wrong but the light keeps on flashing no matter what I do. I have tried removing from the app and reloading but no change.
I have had the D230 since April 2025.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
same here. And can not find answers.
- Copy Link
- Report Inappropriate Content
Is your doorbell blinking green slowly or quickly? Is the device still displaying a flashing green light during reset? Have you noticed any other LED patterns? For reference, the doorbell normally flashes red rapidly during reset, then switches to alternating red/green when ready for setup.
If you power-cycle the doorbell (remove/reinsert batteries), what light sequence occurs?
**How to reset Tapo D230: press and hold the SYNC/RESET button for about 5 seconds, the LED indicator will start blinking red quickly while resetting.
- Copy Link
- Report Inappropriate Content
Same here green light flashing continuously and battery draining very fast. Not able to view the camera on the doorbell and always goes to tap for preview. All started when I clicked on a button that came up to update software. Hasn't worked since then. Deleted the doorbell from my app and now I cannot get it to link up again. Tried pressing the reset button for 5 seconds but always goes back to the green flashing. Help!
- Copy Link
- Report Inappropriate Content
AndrewP47 wrote
Same here green light flashing continuously and battery draining very fast. Not able to view the camera on the doorbell and always goes to tap for preview. All started when I clicked on a button that came up to update software. Hasn't worked since then. Deleted the doorbell from my app and now I cannot get it to link up again. Tried pressing the reset button for 5 seconds but always goes back to the green flashing. Help!
Do you remember the firmware version before the update? And what version are you trying to update?
Did you remove the doorbell's battery during the firmware update? Can you DM the Mac address of your doorbell?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 120
Replies: 4
Voters 0
No one has voted for it yet.