Smart Home Community > All Threads > Tap C110 Constant flickering LED on front
< All Threads

Tap C110 Constant flickering LED on front

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tap C110 Constant flickering LED on front

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tap C110 Constant flickering LED on front
Tap C110 Constant flickering LED on front
2023-08-25 02:01:28 - last edited 2023-08-25 08:29:57
Tags: #Motion Detection #Abnormal LED
Model: Tapo C110  
Hardware Version: V2
Firmware Version: 1.3.2

Hi, hope someone can help me with the tapo C110 I bought recently, really impressed with the night vision & video quality but I have a LED on the front that is flickering constantly.

 

It's not the status light as I've turned it off but it's the light directly under the lens, from what I can gather this light is only supposed to flash when movement is detected & the alarm function is enabled, I have the alarm function disabled but yet it still flashes & it's reflecting off my bedroom window.

 

Is this normal or has it developed a fault, I've literally used it for just 24 hours!

 

TIA

  0      
 
  0      
 
#1
Options
3 Reply
Re:Tap C110 Constant flickering LED on front
2023-08-25 08:36:29

  @Rich84 

Hi,
According to the UG of the Tapo C110, the light you mentioned is the Alerts Light, and it blinks when the activity is detected.
 

If the Alarm feature on the Tapo app is disabled but the Alerts Light remains blinking, please help confirm the following information.
1. Turn off the Tapo C110, wait for two minutes, turn it back on, and then check if the Alerts Light will work fine.
2. Press and hold on the reset button for 10s on the Tapo C110, wait for two minutes, reconfigure the camera, and check if the Alerts Light will work fine.

 

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:Tapo C110 Constant flickering LED on front
2023-08-25 14:40:09

  @Solla-topee Hi, thanks for your reply but the alert light is still flickering & it happens even if motion detection is turned off.

 

I followed your advice as instructed, is it possible the camera is faulty?

 

  0  
  0  
#3
Options
Re:Tapo C110 Constant flickering LED on front
2023-08-28 11:40:37

  @Rich84 

Hi,
Thank you very much for the updates. 
If the Alerts Light is still flickering even after you reset the camera, it should be the camera is faulty, and you can contact your retailer or local support to get a replacement if it's under warranty.

Have a nice day!

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 934

Replies: 3

Tags

Motion Detection
Abnormal LED
Related Articles
C110 SD card constant issues
492 0
C110 Control Locally
622 0
C110 and Alexa routines
517 0
Remote playback problem with C110
766 1
C110 Low Quality Video
1159 0
Tapo C110 V2.26 bricked
136 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.