@Triffid_Stew I believe the official TP Link guide was to go from 3x to 4x then to 5x If you are on 4.4.4 then it should be grand going to 5.7.4

@Corwin123 Either will work for you You can extend by using another SG10008P, however you will be losing 2 ports due to the uplink between them. Replacing the switch would also work, just depends on...

@BubbaHubba The first thing that jumps to me is what device you are connecting / testing this with and is it connected to the 2.4 or 5ghz frequency? The speeds you are gettting sorta relate to...

@jmeclevenger The EAP610 is an indoor device, you would be better with the new 650 or 610 Outdoor. Depending on your range, you could work fine for 360 degree coverage and could penetrate into the...

@xRuby Gut feeling.. router is causing this! Routers are not switches and can block LAN traffic going over their ports. APs really should be on switch ports and not router ports. If you can borrow a...

@lazydrone If you have an android device, try something like WiFi analyser to see if its "hidden" or something Also post a pic of your config here and we can look to see if anything is strange for...