@Profly Im guessing when you have the Deco connected and in Router mode, you are not going straight from the Deco to the Internet? Basically are you still using the ISP router cabled into the Deco?...

@MarioUrroz Hey The LAN port on the second AP is only really designed to allow the APs to be tailed (chained) together directly. Basically you could run another AP (AP3 for example) via a LAN...

@Kaalz Hey If you have re-installed the network its probably best to start from the router and work outwards. namely are the APs getting full 1000mbps connections to the LAN? If you jack into the POE...

@gka Under wireless, additiaonal settings would you have enabled AP Isolation? If so that will put your WiFi Clients into guest mode and stop them seeing anything but the internet. If enabled,...

@AtithPast Hey Sadly not is the short answer. What you are experiencing is the limitations of the N grade router (also known as WiFi4), this router has a 100MB LAN cable connection so that is your...

@sockethead74 The main loss of WiFi signal is absorbion by the house itself, this is none more prevelent on the outside walls sadly For the record this is measured in -db loss, and -3db is HALF the...