@MDRAJU If you do not have the option to update the controller, then likely you are not logged into the controller with the Cloud Administrator account. I would contact the developer who set this up...

@DISJOSEPH I think you mis-understand what I was proposing, do not use AUTO for the channels, instead set each AP for a specific channel when using 2.4ghz. Start with the one nearest the Camera and...

@OreteP Hey If the C60 is behind another router, then you will be experiencing a double NAT issue (Network Address Translation), basically the first router isnt forwarding the data to the C60...

@dkw1 Hey This has been asked a number of times for other hardware, not specifically Deco. In short, the answer is the chip shortage, as the chips TP Link use in the v2 model are in short supply /...

@DISJOSEPH Hey Packet loss is to be expected on 2.4ghz, especially with 5 APs set for 40mhz widths. The 2.4 spectrum is very small and in nearly all scenarios congested, to reduce packet loss change...

@RickJamesBish I am going to have to be honest here my friend and say I think you should speak to someone local to you who can help you with this. What you are trying to do is rather a simple setup,...