@Malc34 Hey Rattling my brain here to find a way around this for you, so far all i have is 1. A cheap good router, something like the ER605 (business grade device) to do the DHCP, and switch the Deco...

@Malc34 Hey This is quite a common issue and its related to the operating mode of the Deco and not the new plugs you have purchased. In short the Deco has 2 operating modes, ROUTER and ACCESS POINT...

@sjoe80 Hey Most home grade devices, the Deco included come as one SSID banded over both the frequencies, in practical terms there is no real benefit separating the bands as Band Steering is pretty...

@xterso Hey I havent used these devices in a few years, but they can get around 70-90mbps via WiFi with some tweaking. As all 2.4ghz devices, they are subject to massive interference as the 2.4ghz...

@SJM777 Hey The MR500 and MR600 are very alike, almost identical. However the one big difference is the MR600 supports OneMesh which allows you to connect other 'repeater' mesh nodes if you need...

@K18_LDP Hey The EAP660 ceiling/wall mount range sounds like the best for you, in honesty its usually the default go to for 99% of installations, rarely do you need to change away from that syle of...