@ITV I was able to VPN into my clients and update them all 'remotely', didn't need an engineer for any of them. Is this not something you could consider?

@Mike121 Hey Im guessing you have a virgin router, this switch and some PCs / Laptops connected too the switch In that case you do not need any MTU or VLAN on the ports, VLANs are designed to route...

@DavidGeeroms Hey Is it the case that you are running the controller on the same WiFi SSID that you have configured via the controller? I would recommend against doing this, the controller should be...

@Yannie Yannie is correct, really any of the 2xx or 6xx range will support 5ghz and therefore should help Good luck if you do go for Ubiquiti, but even with the HD model 100 is a big ask. Personally,...

@Jeesoon1 Yes that will be correct On Omada supported switches, it will only show what clients are connected to each port as it is aware of the switch and all the ports. The omada switch will feed...

@Gordon_Taylor Hey The 4010P kit is the older homeplugs and from experience these are known to be susceptible to interference. Have these been working before or is this a new install? It it was...