PhilbertLV5Online
Following: 2Followers: 15
Forums/ Controllers
2023-03-29 21:06:24
Re:Controllers should run all time?
@dbSoft In short, yes it should The controller is constantly talking to the APs and handing Roaming / Mesh functionality, you lose a lot of features when its not online. While you can shut this down,...
1HELPFULS
Forums/ Wireless
2023-03-29 21:02:17
Re:Power Saving EAP 225
@mex1254 1. yes this would disable the broadcasting of the SSID as a whole, therefore it would disable all the APs 2. Sadly not, the netgear switch would not be managed by the controller, therefore...
0HELPFULS
Forums/ Wi-Fi Routers
2023-03-28 17:39:01
Re:AC1200 Lost half speed when using Access Point Operation Mode
@KOKOSI 500mbps sounds perfectly correct for an AC1200 WiFi connection, the AC (WiFI5) hardware is capable of 1200 with 3x3 connection, but most devices are just 2x2 and therefore the max speed is...
1HELPFULS
Forums/ Wireless
2023-03-28 17:28:05
Re:Power Saving EAP 225
@mex1254 There is two options for this, both require a controller running 1. Use the time schedule to power off the SSID during that specific time, this reduces the power used by the AP 2. If you...
0HELPFULS
Forums/ Wireless
2023-03-28 17:24:27
Re:Mesh connectivity with software controller
@dbSoft Hey If you are going to use Mesh (connect APs via WiFi) you would be best to have the controller running 24/7. While you can shut the server down, its really not recommended as this will take...
0HELPFULS
Forums/ Wireless
2023-03-28 17:09:39
Re:Mesh with wired access points?
@Philbert P.S. Also remember MESH in omada isnt Roaming, the two are confused quite a bit.. Roaming is the ability to work as one network and move users about, Omada can do this. Mesh is simply the...
0HELPFULS
1747576...