stupidbirdLV3Offline
Following: 0Followers: 3
Forums/ Pharos Wireless Bridges
2015-10-29 22:21:08
Re:Some advise.
So you got a 7210N on the roof of office and two 5210G: one in building_1 and the other in building_2. You want to cover outdoor area around the two building, right? But you can power one device in...
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-10-29 21:32:47
Re:TL-WA5210G which mode to set
Would you please tell us what kind of devices will you connect to the AP? And the distribution of the devices. Since in long distance wireless transmission, we always use a directional antenna to...
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-10-29 16:12:47
Re:Will this work ? CPE510
I'm not sure if TL-WR841ND/TL-WR720N can do the job well. There are two main challenge: 1. Long distance up to 150m. 2. Obstacle such as walls. I know someone use a 1043ND indoor to WDS far-end...
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-10-29 11:50:05
Re:Some advise.
Hi mark Do you want to wired connect the two 5210G to main router's LAN port and cover Wi-Fi signal inside and outside the building? If so, configure both 5210G in AP mode, one in channel 1 and...
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-10-29 10:33:08
Re:TL-WA5210G which mode to set
I don't think 5 TL-WA5210G can met the demand of such a large project. 1. The recommended distance for 5210G is 0~2km, it's impossible to cover all 100km tracks with only 5 devices. 2. TL-WA5210G is...
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-10-28 11:07:44
Re:Will this work ? CPE510
Hi, AlePeaz In my opinion, CPE510 can well met your demand. All you need is to build a P2P link as I done before. And 150m is a piece of cake for CPE510. Here are some of my experience. 1. Look at...
0HELPFULS
1262728...