@Vincent-TP With EAP LLDP = Disabled and Switch Default Profile LLDP = Disabled ,Switch All Profile LLDP = Disabled the topology now is correct

@Vincent-TP With EAP LLDP = Disabled and Switch Default Profile LLDP = Enabled,Switch All Profile LLDP = Enabled the topology is still not entirely correct. The access points are not shown as...

@Vincent-TP with eap lldp enabled on site setting : topolgy is incorrect access point became the uplink

@Vincent-TP most switch are - TL-SG3428MP - SG3428XMP - SX3016F -T1600G-28TS and -eap 225 -eap 115 All devices are running the latest firmware. After testing, I deleted all switch profiles except the...

@Vincent-TP After updating my hardware controller oc 300 v1, I got major problem with non corresponding uplink and downlink interfaces, got some ap as uplink. I have more than 500 endpoint connected...

@GRL In the GUI the problem was firmware outdated, and all VLAN are configured properly , after some test and changing the omada server ip seems to work now. Thank you