Kash01976LV2Online
Following: 0Followers: 0
Forums/ Routers
2023-01-17 04:20:40
Re:ER605 v2 – New Firmware 2.1.0 May Lead ER605 into Adopting - Provisioning Loop with Controller v5.7
Thank you for the solution. But would greatly appreciate for the TP Link business development team to not let this kind of buggy updates be released to business users prior complete and through...
4HELPFULS
Forums/ Routers
2023-01-16 08:53:50
Re:ER605 v2 Firmware update 2.1.0 causes adopting loop
@SuperUserOne Same issue , a nuisance every few minutes notification about OMADA device offline and online and than EAP devices connected. Device shows adoption in progress than connected and repeat,...
1HELPFULS
Forums/ Controllers
2022-12-20 04:53:35
Re:Stuck Adopting/Provisioning ER605V2 after OC200 update to 5.7.6
@AdminSBO I was facing similar issue with ER7206 and ER605 both using HW controllers at 5.6.4 OC200 and OC300 respectively. For me the solution was to hard reset all the devices that were behaving...
0HELPFULS
Forums/ Controllers
2022-12-10 08:26:40
Wirless Client Show up as Wired -
OMADA OC200 was running V5.6.4 and had multiple issues, DHCP error , not coming online, and continues disconnects from EAP 225 (heartbeat missed and then disconnected) Also showed Wireless clients...
0HELPFULS
Forums/ Routers
2022-12-07 00:51:30
Re:Connected Without internet
Solved Only DNS had to be set manually under LAN settings. The client devices were getting primary DNS as gateway 10.0.0.1 and were not able to get Internet connectivity
0HELPFULS
Forums/ Controllers
2022-12-07 00:50:33
Re:Clients connected to WIFI/EAP with out internet
Solved Only DNS had to be set manually under LAN settings. The client devices were getting primary DNS as gateway 10.0.0.1 and were not able to get Internet connectivity
0HELPFULS