@avpopov1977 Gateway (ER8411) DHCP isnt pro-active, meaning it does not actively send out DHCP offers to clients. It is purely reactive, meaning it only respons to DHCP requests from clients. In this...

@SCMAF is .5.X the LAN side and .4.X the WAN side of the router? Are the both LAN side but different vlans? If its the first, then you just need to set up one-2-one NAT for each camera IP and give it...

I may be compltely wrong, but im sure this has been brought up before and the concensus was that with a Module, the ER8411 will connect at 1, 2.5 and 10g, but not 5 You may need a media converter as...

@Javito Only the OC400 hardware controller and Software controller (i think) can show per-user DPI data

@jra11500 I can confirm a similar behaviour For me, all devices are properly highlighted on the correct VLAN the first time i select that vlan in the list. After that, if i reselect the same VLANs...

@jra11500 Switch allow rules will just let the traffic sent by the client hit the gateway or direct L2 frame-forwarding if on the same vlan (gateway not needed, if the switch MAC table has the...