@J.S.S I understand that you have one and the same subnet on the WAN and LAN sides of the ER605. Both 192.168.10.20/24 and 192.168.10.15/24 belong to the same 192.168.10.0/24 subnet. This is not...

@J.S.S Is the Starlink modem/router connected to the WAN port of the ER605? What is the IP address and the subnet mask of the ER605 on its LAN side? Are there any static routes defined on the ER605...

@RickJamesBish Those connections look fine to me and I understand that everything is actually working, but there is just a performance issue. I like that you have added a switch to the configuration...

@cah1982 No, you always create a LAG group on the switch first. Just use one cable initially. Connect the other one once you finished the setup.

@cah1982 So which would be the option i can use and is best, would i set this first? XOR (balance-xor) You can try Round-robin (balance-rr), but that may result in many retransmissions due to out of...

@Oskar_B_98 What is that ISP Fiber? Is it a combo with a router? If there is no router there, you need to connect your router/firewall to it first (assuming your router does NATting). An ISP gives...