Hi @Martin521 Thanks for posting in our business forum. If you are in standalone mode, go to Layer 3, Interface, and set this up. The VLAN 1 which is the default.

Hi @DarrenL Thanks for posting in our business forum. This should be possible if you could try that to see if it meets your expectations.

Hi @asciutto Thanks for posting in our business forum. asciutto wrote Clive! Thanks for the reply. Cable is roughly 50' long. Tested the EAP223 with several different factory 3' cables and none of...

Hi @NajmuSakib Thanks for posting in our business forum. NajmuSakib wrote Hi @Clive_A As i checked the Specification of this switch it shows that it supports STP as the option in the portal is...

Hi @EricPerl Thanks for posting in our business forum. EricPerl wrote @Clive_A , By the way, I suspect none of these limits are documented (designed for 60-80, hard fail at ~250). I also suspect the...

Hi @ticedoff8 Thanks for posting in our business forum. See your home router WAN IP on that, you need fully routed, and you need to use the full tunnel mode. ticedoff8 wrote When they access What Is...