chr0m4t1cLV1Online
Following: 0Followers: 0
Forums/ Tapo Smart Switches
2024-01-14 22:39:05
Re:Can S210 be used with Live + Neutral setup
@Lethaldesi Lethaldesi wrote @chr0m4t1c so I have three wires in my switch. I think one is black and one is blue and the last is the green/yellow. i assume the black is the load and the blue is the...
0HELPFULS
Forums/ Tapo Smart Switches
2023-10-27 08:34:57
Re:Can S210 be used with Live + Neutral setup
@LukeBorman Yes, that's the same setup I used and mine is working fine. Basically the black wire is what's called a switched live in that it is live when the switch is on and technically neutral when...
0HELPFULS
Forums/ Tapo Smart Switches
2023-10-09 06:07:12
Re:Can S210 be used with Live + Neutral setup
@GabrielMitch I think you have misunderstood my setup. I only have three wires, one of which is an earth/ground and is attached to the metal pattress box in the wall. The other two are red (live) and...
0HELPFULS
Forums/ Tapo Smart Switches
2023-10-08 07:01:09
Re:Can S210 be used with Live + Neutral setup
@Akitsuki Ah, so my "neutral" will actually be a switched live with the loop in the ceiling rose and should have been marked with some red tape to indicate that it will be live when the switch is on,...
0HELPFULS
Forums/ Tapo Smart Switches
2023-10-07 20:26:58
Can S210 be used with Live + Neutral setup
I would like to replace a switch that presently works on a UK live/neutral connection. Looking at the installation instructions for the S210, it's not clear if I could wire up the switch Live->Lin...
1HELPFULS